Follow US:

How do you pronounce emulsion in English (1 out of 97).

Captions are loading...

Translation of emulsion

Translate emulsion to Go

IPA (International Phonetic Alphabet) of emulsion

The International Phonetic Alphabet (IPA) is an alphabetic system of phonetic notation based primarily on the Latin alphabet. With phonetic transcriptions, dictionarie tell you about the pronunciation of words, because the spelling of an English word does not tell you how you should pronounce it. Below is the phonetic transcription of emulsion:
/ɪmʌlʃən/

Derived Form of emulsion

noun
plural: emulsions
Noun
1
(chemistry) a colloid in which both phases are liquids
  1. an oil-in-water emulsion
Hypernymscolloid,
Type ofcolloid,
See alsoemulsify,
2
a light-sensitive coating on paper or film; consists of fine grains of silver bromide suspended in a gelatin
Synonymsphotographic emulsion,
Hypernymscoating,
Partssilver bromide, silver nitrate,
Type ofcoat, coating,
See alsoemulsify,

emulsion on Youtube

  1. The hardness is a backing the emulsion is like saran wrap and you can strip that emulsion off
  2. Once it's in the splicer, make sure you scrape off every trace of emulsion.
  3. A QUINCE AND A EGGNOG MARJORAM EMULSION.
  4. UNEXPOSED EMULSION AND, IN THE PROCESS,
  5. oil to create an emulsion of approximately 20,000 monosized
  6. GOT SOME EARLY '80s KODACHROME. YOU CAN MESS WITH THE EMULSION, DO A LITTLE L.S.D. FLASHBACK.
  7. IT HAS A BROWN BUTTER EMULSION, HAZELNUTS, BRAISED ENDIVE,
  8. metaphase, we're going to add some photographic emulsion on top of that
  9. binding materials, either bitumen, tar, emulsion or cutbacks and among bitumens we can also
  10. the uses of emulsion in pavement construction because in the previous two lessons on bituminous
  11. In this lesson we will cover another type of bituminous binder that is emulsion, its
  12. in bitumen emulsions we can use emulsion without the additional need of heat or solvent.
  13. These components are for producing emulsion. These components are introduced into a colloid
  14. the emulsion by minimizing the coalescence of bitumen globules, this is what we discussed
  15. charged aggregates rather positively charged emulsions are most widely used. Cationic emulsion
  16. the emulsion is anionic as particles would migrate towards the anode placed in the emulsion
  17. anionic emulsion. Emulsifiers for anionic emulsions are usually fatty acids derived
  18. The emulsions can also be classified on the basis of how quickly the emulsion is reversed
  19. dressing, medium setting emulsion is to be used for open graded premix having predominantly
  20. These are the typical specifications for cationic emulsion. as i indicated cationic emulsion