Follow US:

How do you pronounce endstop in English (1 out of 29).

Normal
Captions are loading...

Translation of endstop

Translate endstop to Go

IPA (International Phonetic Alphabet) of endstop

The International Phonetic Alphabet (IPA) is an alphabetic system of phonetic notation based primarily on the Latin alphabet. With phonetic transcriptions, dictionarie tell you about the pronunciation of words, because the spelling of an English word does not tell you how you should pronounce it. Below is the phonetic transcription of endstop:
/ɛndstɑp/

endstop on Youtube

  1. this printed part that it for the endstop, an mechanical endstop,
  2. We need the endstop support, the endstop, three M3 nuts, two M3x8 bolts and one M3x16
  3. problems: First, the part cooling fan did not fit anymore and the Z-axis endstop had
  4. your endstop for your z-axis now let me point out something about these
  5. the endstop so I can point out where our endstops are so we have our X and
  6. right here to be upper portion of the endstop and then
  7. endstop
  8. endstop underscore invert and as you can see right here what we need to
  9. to comment out up above the Z min probe uses the min endstop pin this is
  10. And this is a regular mechanical endstop...
  11. Endstop Engaged and it will touch the bed.
  12. was calibrating the Z endstop/height before each print...
  13. Here we find the X axis endstop support, that besides being a printed part exclusively for its function
  14. Which perfectly fits with the Z axis endstop support
  15. the X axis endstop, the nuts and bolts, a nema 17 stepper motor,
  16. We are going to prepare the endstop, we need three M3x8 bolts
  17. And the endstop doesn't have any looseness
  18. We place the endstop in its position
  19. In this step we are assembling Z axis endstop
  20. The first thing we need to do it to place the endstop on its position and we introduce the two bolts