How do you pronounce handwheel in English (1 out of 19).

Normal
Captions are loading...

Translation of handwheel

Translate handwheel to Go

IPA (International Phonetic Alphabet) of handwheel

The International Phonetic Alphabet (IPA) is an alphabetic system of phonetic notation based primarily on the Latin alphabet. With phonetic transcriptions, dictionarie tell you about the pronunciation of words, because the spelling of an English word does not tell you how you should pronounce it. Below is the phonetic transcription of handwheel:
/hændwil/

Derived Form of handwheel

noun
plural: handwheels
Noun
1
a wheel worked by hand
Type ofwheel,
Part oflathe, standing press, valve,
2
control consisting of a wheel whose rim serves as the handle by which a part is operated
Type ofcontrol, controller,
Typessteering wheel, wheel,
Part oflathe, valve,

handwheel on Youtube

  1. Rotating handwheel to a stop.
  2. The chief shortcomings are : (a) Accurate control with the handwheel is
  3. which was simply one turn of the handwheel on the dividing head, for each cut.
  4. In this example, the butterfly valve is operated by turning the Handwheel
  5. the Handwheel could be replaced by one of three typical sources of energy,
  6. Before starting to sew, slowly turn the handwheel toward you and check the needle position.
  7. you might have to do this with your handwheel
  8. the handwheel and that is now safe to enter the aisle.
  9. Rotate the handwheel toward you (counterclockwise) to make sure the needle does not strike the presser foot.
  10. at the moment are the traverse handwheel,
  11. and directly above the traverse handwheel,
  12. Before starting to sew, slowly turn the handwheel toward you and check the needle position.
  13. Before starting to sew, slowly turn the handwheel toward you and check the needle position.
  14. Before starting to sew, slowly turn the handwheel toward you and check the needle position.
  15. I first faced the stock off to have a reference surface and zeroed the digital handwheel dial.
  16. Then I moved the tool the 7.5mm mark machined away the hex, zeroed the crossfeed handwheel
  17. Before starting to sew, slowly turn the handwheel toward you and check the needle position.
  18. that much bigger and i needed this handwheel to not be so freaking heavy
  19. basic handwheel