How do you pronounce hole-and-corner in English (1 out of 1866989).
Normal
Captions are loading...
Translation of hole-and-corner
Translate hole-and-corner to Go
IPA (International Phonetic Alphabet) of hole-and-corner
The International Phonetic Alphabet (IPA) is an alphabetic system of phonetic notation based primarily on the Latin alphabet. With phonetic transcriptions, dictionarie tell you about the pronunciation of words, because the spelling of an English word does not tell you how you should pronounce it. Below is the phonetic transcription of hole-and-corner:
/howl-ænd-kɔɹnɹ̩/
Derived Form of hole-and-corner
adjective
comparitive: more hole-and-corner
superlative: most hole-and-corner
Adjective
1
relating to the peripheral and unimportant aspects of life
Synonymshole-in-corner,
Similarinsignificant, unimportant,
2
conducted with or marked by hidden aims or methods
Synonymsclandestine, cloak-and-dagger, hugger-mugger, hush-hush, on the quiet, secret, surreptitious, undercover, underground,
Similarcovert,
You might interested in how to pronounce these English words near hole-and-corner
hole-and-corner on Youtube
- This bolide is from a decaying star from a black hole, and we call that black hole the
- hell yeah black clover let's get it bro let's get it featuring shrubby and corner corner
- the coil leg must be parallel with the hole(occ hole) and point the leg straight to base leg hole(the black base) (bedal je labu..hahaha)
- decoratives and stuff. but now we don't have any. so let's move into the hole and we will
- On begining of 2019 were brought changes to norms of supplement, which provide, and jumper, and pull-over. Jumper according - with V-like neck-hole and pull-over with round neck-hole, pull-over goes more war
- Get a soda cap, and poke 1 small hole, and 1 slightly larger hole in it.
- Hole and drill through the dowel and have a sinnard hole
- 4 Travrinity What is the similarity and difference between a black hole and worm hole?
- There's the first small hole and then there's the second even smaller hole right there. So it's a good little trick and now it's Fillies
- Handlebar where I need to drill a hole and then tap a quarter inch hole
- A hole into the plastic take the blade off fit it through the hole, and then reattach it on the scroll saw
- Kick the Thrashball through the circular hole in the gate. A rat will exit the hole and a disturbing Locust laughs.
- Which defines what we call the ergosphere of the black hole and then at the inside of black hole?
- So heres a sample out of our number three hole, or the middlings hole. And you can see
- the hole, and let it dry. Add more spackle if the hole isnt filled, then sand smooth.
- drill a hole in the stupid mats, then you screw the fastener in the hole, and
- oxyanion hole. We will see why that is called an oxyanion hole and there are two other residues;
- a hole and this hole has to be complete, finished to appropriate dimension finish, circularity,
- this is the one hole is there in this hole and parallely you have to make this kind of
- stockinet over it. Find that hole and punch that hole through the top
