Follow US:

How do you pronounce hotends in English (1 out of 12).

Normal
Captions are loading...

Translation of hotends

Translate hotends to Go

IPA (International Phonetic Alphabet) of hotends

The International Phonetic Alphabet (IPA) is an alphabetic system of phonetic notation based primarily on the Latin alphabet. With phonetic transcriptions, dictionarie tell you about the pronunciation of words, because the spelling of an English word does not tell you how you should pronounce it. Below is the phonetic transcription of hotends:
/hɑtɛndz/

hotends on Youtube

  1. hotends.
  2. hotends, but this one doesnt seal perfectly, maybe because the bowden tube wasnt cut
  3. when I tried to remove and reinstall hotends, and theres only so much tube you can cut
  4. Now, why would you want to swap hotends at all?
  5. That being said, E3D will apparently also be working on getting their hotends onto the
  6. Specific hotends can only be used up to a certain point of material throughput. If you
  7. The hotends of common 3D printers look pretty much the same and mostly use these small nozzles
  8. But that's not the end of the story, you can also use other hotends.
  9. Here, for example, really light hotends for a delta - you can't avoid ring heating.
  10. Or if you build your own hotends, you know how easy it is to install
  11. The PTFE tube reaches all the way down to the nozzlmme in the hotends, which limits
  12. I took the hotends apart, cleaned the nozzles, cut the ends of the Bowden tubes, and put