Follow US:

How do you pronounce inrush in English (1 out of 22).

Normal
Captions are loading...

Translation of inrush

Translate inrush to Go

IPA (International Phonetic Alphabet) of inrush

The International Phonetic Alphabet (IPA) is an alphabetic system of phonetic notation based primarily on the Latin alphabet. With phonetic transcriptions, dictionarie tell you about the pronunciation of words, because the spelling of an English word does not tell you how you should pronounce it. Below is the phonetic transcription of inrush:
/ɪnɹʌʃ/

Derived Form of inrush

noun
plural: inrushes
Noun
1
an inflow
Synonymsinpour, inpouring,
Type ofinflow, influx,

inrush on Youtube

  1. 200 amps of inrush. We had a motor at work that would draw over 800 amps of inrush
  2. we can control it to completely remove the inrush or allow some acceptable inrush to get in if you raise the
  3. also. So, magnitude of inrush current comes down. So, if the magnitude of inrush comes
  4. Rises with the rise of the motor speed they call this initial spark the inrush current motors like engine starters draw over
  5. How do we help the large start of inrush current one good solution would be to raise the supply voltage
  6. That's a whole other topic if we turn on the motor straight up the inrush current rises to
  7. this is how we manage the inrush current by controlling the motors of life instead of turning the motor dead on we
  8. We allow some inrush currents so that the motor can kick on faster now
  9. cycle to limit the inrush current and it's powered down we can just turn off the switches and let the motor stop on its
  10. You can see here that the inrush current into the crank motor is around 750 amps, and quickly drops to around 200 amps while we are cranking the car.
  11. Now if we look at the battery voltage we see that it starts around 12 volts, and when there is the inrush current,
  12. Using their whole senses and inrush to concentration mode
  13. the inrush draw is very high and can
  14. in a motor that can be caused by switching events, inrush,
  15. So what happens when I close the switch? There is going to be a large inrush current. Why?
  16. Input is at the positive peak and the output voltage is zero and that large inrush current
  17. If you are starting large motor, what will happen? They require huge inrush current that
  18. okay you there could be inrush current because voltage applied to the machine has changed
  19. that fast okay there could be there is inrush current in almost all the voltage fed PWM
  20. Today, an inrush of people could be seen from Shenzhen Bay to HK.