How do you pronounce isobaric in English (1 out of 57).

Normal
Captions are loading...

Translation of isobaric

Translate isobaric to Go

IPA (International Phonetic Alphabet) of isobaric

The International Phonetic Alphabet (IPA) is an alphabetic system of phonetic notation based primarily on the Latin alphabet. With phonetic transcriptions, dictionarie tell you about the pronunciation of words, because the spelling of an English word does not tell you how you should pronounce it. Below is the phonetic transcription of isobaric:
/ajsɑbɹɪk/

isobaric on Youtube

  1. you have two isobaric processes here okay. Process two to three and four to one are isobaric
  2. expansion and isobaric heat rejection isobaric heat extraction. Since you do not have any
  3. here and these are the isobaric lines. Since we have pressure in the y axis obviously isobaric
  4. Whereas, like isobaric means constant pressure.
  5. isobaric process.
  6. red path, you start with an isobaric process and then you
  7. And process two to three is isobaric heat rejection. This was isothermal heat rejection
  8. in case of Carnot cycle. But in the isothermal process is replaced by isobaric process in
  9. Brayton cycle okay. So process two to three is isobaric heat rejection. Then process three
  10. to four is isentropic expansion and process four to one is isobaric heat extraction. So
  11. compression. So it is a vertical line. Process two to three is isobaric heat rejection.
  12. again isobaric heat extraction from the heat source. That means basically you have heat
  13. process two to three if you remember is isobaric heat rejection okay. During this process there
  14. And finally process four to one again work is zero during this process and its isobaric
  15. transfer processes are replaced by two isobaric heat transfer processes. And for the same
  16. replaced by isobaric heat rejection this is the first deviation from the Carnot cycle.
  17. four processes. Process one to two is isentropic compression process two to three is isobaric
  18. heat rejection process three to four is isenthalpic expansion and four to one is isobaric and
  19. or the heat rejection process is isobaric but not isothermal. Because during the process
  20. remains constant. That means initial heat rejection is an isobaric process but non isothermal