How do you pronounce locknut in English (1 out of 45).

Normal
Captions are loading...

Translation of locknut

Translate locknut to Go

IPA (International Phonetic Alphabet) of locknut

The International Phonetic Alphabet (IPA) is an alphabetic system of phonetic notation based primarily on the Latin alphabet. With phonetic transcriptions, dictionarie tell you about the pronunciation of words, because the spelling of an English word does not tell you how you should pronounce it. Below is the phonetic transcription of locknut:
/lɑknʌt/

Derived Form of locknut

noun
plural: locknuts
Noun
1
supplementary nut that is screwed down on a primary nut to prevent it from loosening
Synonymssafety nut,
Type ofnut,

locknut on Youtube

  1. you're going to take your locknut back here
  2. Kline Tools Conduit Locknut Wrench
  3. this locknut wrench works in deep or tight boxes
  4. The innovative Conduit Locknut Wrench
  5. Only the locknut remains. We place it and press. We will check that it turns correctly.
  6. want to make sure that your locknut is threaded all the way down to give your fork cap as
  7. flat washers, and the nylon locknut.
  8. This is going to use the 18-millimeter bolts, flat washers, and 19-millimeter nylon locknut.
  9. Then we can secure those down with the other flat washers and nylon locknut.
  10. do you see this little locknut on the bottom? We're going to loosen that up. Now, this should
  11. in, you're going to find the locknut, and this is a slip joint cover - we'll talk about
  12. go into the hole. So we'll put that in the hole there, we'll take the locknut and while
  13. screw the locknut on. And as we've mentioned before, your toilet tank is porcelain so you
  14. don't need to really tighten the locknut too tight. Hand tightening, in most instances,
  15. down; that someone adjusted the valves and didn't tighten the locknut and it
  16. like funky wrenches to grab the locknut.
  17. 17. Tighten the tie rod end locknut. Use a combination spanner #24 (2 pieces).