How do you pronounce tenons in English (1 out of 63).

Captions are loading...

Translation of tenons

Translate tenons to Go

IPA (International Phonetic Alphabet) of tenons

The International Phonetic Alphabet (IPA) is an alphabetic system of phonetic notation based primarily on the Latin alphabet. With phonetic transcriptions, dictionarie tell you about the pronunciation of words, because the spelling of an English word does not tell you how you should pronounce it. Below is the phonetic transcription of tenons:

Derived Form of tenons

root word: tenon
plural: tenons
root word: tenon
Noun: tenon
a projection at the end of a piece of wood that is shaped to fit into a mortise and form a mortise joint
Holonymsmortise joint,
Type ofprojections,
Part ofmortise joint, mortise-and-tenon joint,

tenons on Youtube

  1. to hold the tenons and mortices together.
  2. Pour une 5e anne conscutive, nous tenons cette rencontre sous forme de webdiffusion dans le but de communiquer avec le plus grand nombre possible de Canadiens.
  3. I'll insert the tenons with glue into all of the rails
  4. Even with the tenons pre-glued,
  5. We used dominoes instead of traditional mortise and tenons.
  6. As you can see it is easy to make a groove in the jack studs that will accept the logs' tenons
  7. Was carefully fitting the doorway jack studs as it is easy to break off those tenons
  8. You might have noticed I have made 16 cm 6 inch long round tenons on the top of the jack studs
  9. These extra long tenons will go through the header into the gable's top log
  10. jack stud's extra-long tenons because I decided to reduce the roof pitch I will
  11. have to make another cut thus trimming the tenons' length again that's what
  12. and these tenons fit like a glove.
  13. in the dadoes or on the tenons.
  14. Now for some tenons.
  15. I'll keep that setting and cut the rest of the tenons.
  16. Of course we do have eight total tenons to finesse
  17. To make the tenons, we'll scribe the shoulders first.
  18. We put plenty of glue on the tenons
  19. those tenons ended up a little bit loose
  20. and because those tenons are loose I'm using epoxy