Hello there! Welcome to our smanos video channel.
In this video we will show you the X500 GSM/SMS Plug&Play alarm system.
This system doesn't need a contract and doesn't have any monthly fees.
It is very easy to use with the free app can be set up within several minutes.
It works on a frequency specially made for security at 868 megahertz
and is expendable up to 50 sensors, 50 RFID-tags and 10 remote controls.
The X500 kit comes with a PIR motion detector, 2 door/window contacts,
2 remote controls and 2 RFID tags.
Furthermore the box contains an AC adapter, a bracket for the motion detector,
double sided tape, a screw kit, warning decals, a quick guide and the user manual.
Well, how does the alarm system work.
When a sensor has been triggered, it will send a signal to the control panel.
The control panel will sound the built-in siren immediately and sent an SMS to all stored phone numbers.
After texting, the panel will call all stored phone numbers
When an optional siren is installed the panel will sound this siren too.
In order to receive text notifications and calls the X500 panel needs to have a SIM card.
Keep in mind to disable the standard pass code and disable voice mail.
Also keep in mind a normal size SIM card is used.
So when using a nano or micro SIM card you will need an adapter to fit into the control panel.
To install the system, the AC adapter needs to be connected in the bottom of the control panel.
Next, turn on the power by flipping the switch. The panel will show its LED indicators.
Now, let's have a look at the door/window contact.
Pull the strap out of the sensor. Keep the triangles of the door/window contact pointed to each other.
and now we separate the magnet from the sensor and the red indicator on the sensor will be seen.
Which means it has been triggered.
Installation can be done at the side of the door or window opening.
Place the sensor on the side, place the magnet on the door or window itself.
Make sure the triangles face each other and keep the distance within one centimeter.
Then the PIR motion detector.
Pull the strap out the motion detector. It will start testing for about 30 seconds.
When the detector sees movement twice within three minutes,
the detector goes into power saving mode.
This means it will not be triggered and will not send a signal to the control panel.
Click twice on the button at the backside of the motion detector in order to
send a signal to pair the device.
Installation height is best at 2.2 meters.
This will give a range of about 8 meters at 110 degrees wide.
Installing the X500 can be done with the free app, which is available in the App store and Google Play.
With the X500 app you have the ability to control and set up the alarm system.
At the home screen it's possible to choose out of 6 most used functions.
The other tabs are for for settings like delay time, schedule, naming RFID tags, etc.
And that's the end of this product video. I hope you enjoyed it.
Feel free to follow our channel for more upcoming videos about our products.
For more information please visit www.smanos.com or find us on Facebook and Twitter for the latest updates.
Thank you for watching and see you next time!