Welcome to Hemmings Park, home of the Liberty Swing.
To start the ride, reverse the chair into the swing as far as possible
and apply the brakes or disconnect the power.
Step two, pass the chain through the wheel,
pull it back over the hook by turning the knob clockwise.
Step three, fasten the seatbelt over the occupant
by using the side support anchor points.
Step four, unlock the device with the MLAK key.
Pull the ramp up, pushing the swing back slightly with your hand.
Lower the ramp onto the ground.
Once your ride is complete, reverse all steps.
The Swing requires a MLAK key to be unlocked and fully operational.
If you require this key you can collect one from one of Council’s customer service centres.