The Full Form of ISMC is‍ Indian Standard Medium Channel.

Indian Standard Medium Channel (ISMC) are used to hold the building in construction. ISMC channels are made sturdy and heavy to uplift the construction site so that it won’t collapse. The company manufactures apex quality of channels in the industry. Our channels are exclusively designed to endure adverse weather conditions as well as heavy load. The rates of the channels are best in the market.

This Indian Standard (Third Revision) was adopted by the Bureau of Indian Standards
on 6 April 1989, after the draft finalized by the Structural Sections Sectional Committee had been
approved by the Structural and Metals Division Council.
Under the steel economy programme, a rational, efficient and economical series of Indian
Standards on beam sections, channel sections and angle sections was evolved in 1957 and
IS 808 : 1957 was published covering junior, light weight, medium weight, wide flange and heavy
weight beam sections; junior, light weight and medium weight channel sections and equal and
unequal leg angle sections. This standard was revised in 1964.
In the second revision of this standard, parts relating to medium weight beam sections — MB
series, column sections — SC series, channel sections — MC and MCP series and equal and
unequal leg angles were revised and published as Parts 1, 2, 3, 5 and 6 of IS 808, respectively.
Sections not covered in these parts, however continued in IS 808 : 1964.
In the present revision, the Sectional Committee felt it convenient to merge all the five parts into
one standard. The sections which were retained in IS 808 : 1964 subsequent to its second revision
in five parts are included in this standard with a view that these sections although not being rolled
in the country at present may in future be rolled owing to their efficiency and resultant economy in
the use of steel. However, the designers are advised to check from JPC/producers regarding
availability of such sections.