The Full Form of GRUB is‍ Grand Unified Bootloader.

The GRUB (Grand Unified Bootloader) is a bootloader available from the GNU project. A bootloader is very important as it is impossible to start an operating system without it. It is the first program which starts when the program is switched on. The bootloader transfers the control to the operating system kernel.

GRUB Features

GRUB is the default bootloader for many of the Linux distributions. This is because it is better than many of the previous versions of the bootloaders. Some of its features are:

• GRUB supports LBA (Logical Block Addressing Mode) which puts the addressing conversion used to find files into the firmware of the hard drive
• GRUB provides maximum flexibility in loading the operating systems with required options using a command based, pre-operating system environment.
• The booting options such as kernel parameters can be modified using the GRUB command line.
• There is no need to specify the physical location of the Linux kernel for GRUB. It only required the hard disk number, the partition number and file name of the kernel.
• GRUB can boot almost any operating system using the direct and chain loading boot methods.

GRUB Installation Process

GRUB automatically becomes the default loader after it is installed. The following steps are followed to install GRUB:

• It is important to use the latest GRUB package available to install GRUB. Or the GRUB package from the installation CD-ROM is used.
• The root shell prompt is opened and the command /sbin/grub-install is run after the GRUB package is installed. The in the command is the location where the GRUB stage 1 boot loader should be installed.
• After all this is done, the GRUB graphical boot loader menu appears before the kernel loads into memory when the system boots.

GRUB Boot Process

The boot process using GRUB requires the GRUB to load itself into memory. This is done in the following steps:

• The stage 1 boot loader is loaded into the memory by the BIOS. This boot loader is also known as the primary boot loader. It exists on 512 bytes or less of disk space within the master boot record. The primary boot loader can load the stage 1.5 or stage 2 boot loader if required.
• The stage 1.5 boot loader is loaded into the memory by the stage 1 boot loader if required. This may be necessary in some cases as some hardware require a middle step before moving on to the stage 2 loader.
• The secondary boot loader is also known as the stage 2 boot loader and it can be loaded into the memory by the primary boot loader. Display of the GRUB menu and command environment are functions performed by the secondary boot loader. This allows the user to look at system parameters and select the operating system to boot.
• The operating system or kernel is loaded into the memory by the secondary boot loader. After that, the control of the machine is transferred to the operating system.